Goelst G-Motion, Руководство пользователя

Страница: 33 / 44

29
4
English
Programming
3.3 Timer
motor LED colour yellow:
The built-in timer offers a 24hr function and a showroom function.
With the 24hr function a usage pattern can be recorded, which then will repeat and operate
the system automatically every 24hrs.
The Showroom setting (option 5 in menu) is a demo setting for showrooms, fairs and shop
displays.
With the Showroom setting active, the system moves at 15s intervals from end position to
end position, to attract attention. The LED will show a colour palette.
24hrs Timer
The built-in 24hrs timer is a self learning timer, that can record up to 4 events which will be
replayed every 24 hrs.
1. 24hrs Timer: Erase
Reset the 24hrs Timer with option 1 in the menu, this erases recorded events and
switches the timer off. The LED on the motor unit is off.
2. 24hrs Timer: On
After learning mode, the timer is automatically set to ‘ON’ and recorded events will
be replayed every 24hrs. While 24hrs Timer is ‘ON’, the LED on the motor unit dis-
plays a short yellow signal every 20s.
The 24hrs TImer can only be ‘ON’ if events have been recorded.
3. 24hrs Timer: Pause
The 24hrs Timer can be paused without losing the recorded events.
While 24hrs Timer is ‘Paused’, the LED on the motor unit displays 2 short yellow
signals every 20s.
By selecting 24hrs Timer ‘ON’. the timer will restart recorded events at their origi-
nally recorded time of day.
4. 24hrs Timer: Learning mode
By acivating the learing mode (option 4 in menu) the timer wil record max. 4 events
during max. 24hrs. Until recording mode ends, the LED on the motor unit slowly
flashes yellow. Note: By activating the learing mode (option 4 in menu), previous
recordings will be erased.