Goelst G-Motion, Руководство пользователя

Страница: 31 / 44

27
4
English
Programming
MENU 3
3.1 Operation mode
3 different operation modes are available, defining how the motor unit responds to
OPEN
and CLOSE commands from 1- or 2-button controls.
Settings:
Mode 1 : Standard 2-button operation
(default setting)
button press < 1s.: system moves to end postition
button press > 1s.: system moves for the duration of the connection or button press
Mode 2 : Inverted 2-button operation (‘vertical blinds’ setting)
button press < 3s.: system moves for the duration of the connection or button press
button press > 3s.: system moves to end postition
Note: recalling intermediate positions or programming end positions for the first time is not
possible when mode 2 is active
.
Mode 3 : 1-button operation
button press < 1s. : system closes, opens or stops
1. When the system is in one of its end positions:
- > move to opposite end position.
2. When the system is moving:
- > STOP
3. After a stop, press button again within 2s:
- > move in opposite direction
4. After a stop, press button again after 2s:
- > continue in same direction
Note: recalling intermediate positions is not possible when this feature setting is active
.
After 15s. without input, the motor unit quits programming mode.
Please read the steps of this feature first before starting.
SET Operation mode
motor LED colour red:
1. Press and hold the OPEN + CLOSE buttons until the LED on the motor unit flashes
white at high speed (after ~12s.)
(First the LED will turn white continuously, then flashes white slowly, keep pressed
until the LED flashes white at high speed)
2. Repeatedly press OPEN or CLOSE until the LED on the motor unit is red.
3. Shortly press the
OPEN
+
CLOSE
buttons to enter the feature menu,
4. The LED on the motor unit now flashes red at the current setting:
5. Cycle through the options below using
OPEN
or
CLOSE:
1x flash = Standard 2-button operation (Default)