24
4-6. Setting Mode
In the Setting Mode, changes can be made according to requirement on the printing mode, options, media type,
and parallel interface (printer can only go into setting when connected to PC by parallel cable, USB cable, or
serial cable).
1. Install label and ribbon according to the Ribbon & Label Installation Diagram, and make sure the Ready light
turns green.
2. Press and hold the ”Pause” key, then press the ”Feed” key, hold these two keys, and the LCD Display will
show ”Setting Mode.”
3. Release the keys to enter the “Setting Mode,” and it will show the setting items.
4. In the Setting Mode, the keys have the following functions:
Feed Key : Selection
Pause Key : Enter or confirm
Cancel Key : Exit
5. Items with the ”
＊
” sign is of option items.
6. Before exiting the Setting Mode, printer will prompt user whether to save the settings.
After user’s reponse on whether or not to save the settings, printer will return to standby mode.
Printing mode :
Thermal Transfer:
when printing, a ribbon must be installed to transfer the print
contents onto the media.
Direct Thermal:
when printing, no ribbon is necessary, it only requires direct
thermal media.
Option Set :
Stripprt mode:
turn on the stripper function
Cutter mode:
turn on the cutter function
Option OFF:
select this option to turn off the stripper and cutter functions. This
is the default setting.
Paper Set :
Black Mark:
for label or plain paper with black mark in the back
Gap Paper:
for labels with liner and gap, or hang tags. The default is set to be
gap paper.
Plain Paper:
for plain paper
COM Port Set :
Baud Rate:
300/ 600/ 1200/ 2400/ 4800/ 9600/ 19200/ 38400 bits, default: 9600 bits
Parity Set:
None / Odd / Even Parity, default: None Parity
Data Lengh:
7 / 8 bits, default: 8 bits
Stop bit:
1 / 2 bits, default: 1 bit
Auto Sensing
Auto mode:
auto sense the label type (black mark, gap & plain paper) and
length
Gap mode:
detects gap paper
Black mode:
detects black mark label
Setting Review:
Review setting items
LCD Language
English
Simplied Chinese
Traditional Chinese
【
NOTE
】
:
(1) “Default Setting” is the original setting from the factory, if other changes are made on the settings, then follow
the new settings.
(2) Printer will store the previous settings after power off, thus if settings are to be changed again, please enter
the Setting Mode to reset.
