17
Chapter 3
3-1. Stripper and Internal Rewinder Parts
31 Bottom Cover Screw
32 Liner Rewind Shaft
33 U Shape Clip
34 Max. Liner Rewind Sensor
35 Rewinder Cable Connector
36 Screws
3-2. Stripper and Rewinder Installation
1. Face the printer front, and unscrew the
Bottom Cover Screw.
2. Remove the Bottom Front Cover.
3. Open the Top Cover of the printer, and
turn the printer sideways.
4. Remove the Rewinder Option Cover Plate.
5. Install the Rewinder unit.
6. Take off the U Shape Clip from the Liner
Rewind Shaft, and then screw the
Rewinder unit onto the printer.
