10
Removing and emptying
the dust canister
Press dust canister
release button to
remove the dust
canister.
Hold dust canister over
rubbish bin and unclip
the lock on the bottom
of the canister, allowing
the dust to empty.
Close the base of the
dust canister, align the
canister base back onto
the machine and push
until it clicks back
into place.
WARNING:
If the filter or hose is clogged, the motor may shut down in
order to protect itself from overheating. If this occurs, unplug the
vacuum, clean the filter and inspect the hoses and canister for clogging.
Allow hour for the unit to fully cool down before resuming use.
Checking for blockages
Inspect the lower tube and nozzle and
remove any dirt and debris.
The lower hose can be removed from
the nozzle if needed.
Remove the main hose by rotating the
connector to unlock, and check for
blockages in the hose and elbow connector.
Remove the dust canister, and follow the steps
on the next page for cleaning.
