background image

2

About this guide

We’re here to help you get the most from your pet upright 

vacuum, so please keep hold of this manual for future use.

THIS PRODUCT WAS DESIGNED AND MANUFACTURED 

TO MEET STRICT QUALITY AND SAFETY STANDARDS. 

THERE ARE, HOWEVER, SOME OPERATIONAL 

PRECAUTIONS YOU SHOULD BE AWARE OF.

1. 

ensure you get the best out of your product.

2. 

Don’t use the pet upright vac for anything other than 

its intended use. The appliance is not suitable for 

commercial use. This appliance is only for household 

domestic indoor use and car cleaning.

3. 

Do not use if the pet upright vac, cord or plug is damaged.

4. 

If the supply cord is damaged, it must be replaced 

by the manufacturer, its service agent or similarly 

qualified persons in order to avoid hazard.

5. 

Remove all packaging prior to use. Inspect the product 

for any damage before use. If damage is found, notify 

ASDA to exchange the product.

6. 

Before connecting the pet upright vac to the power, check 

the voltage shown on the appliance corresponds with 

the voltage in your home. If it doesn’t, contact your 

local store.

7. 

Keep the pet upright vac away from heat sources or 

direct sunlight.

8. 

WARNING: Keep the appliance dry.

9. 

To avoid electric shock or injury, never immerse the 

pet upright vac body, cord or plug in liquid or water.

10. 

Do not handle the appliance with wet hands.

11. 

Keep away from harsh or abrasive cleaning agents or 

solvents.

WARNINGS

:

Содержание GVU402R-21

















Отзывы: