Go-On DYM5167, Оригинальное руководство пользователя

Страница: 64 / 75

Original Instruction Manual GB
7 02/2018
q) Do not touch moving hazardous parts before the machine is disconnected from the mains and
the moving hazardous parts have come to a complete stop.
r) Do not connect a damaged cord to the supply or touch a damaged cord before it is
disconnected from the supply for the reason that damaged cords can lead to contact with live
parts;
s) If the circuit was shorted or a breakdown happens, overload protector will cut off power supply
automatically.
t) In case of accident or breakdown immediately stop the machine: Loosen your grip and the
power supply will be cut off automatically when an accident or breakdown occurs.
u) If the cord becomes damaged or entangled during use, loosen the switch and cut the mains
before touching cord.
v) Inspect the machine, the supply and extension cord for signs of damage or ageing before and
after any use, in a dry, clean and well lit place.
4- Maintenance and storage
a) When the machine is stopped for servicing, inspection, or storage, or to change an accessory,
shut off the power source, disconnect the machine from the supply and make sure that all
moving parts are come to a complete stop. Allow the machine to cool before making any
inspections, adjustments, etc. Maintain the machine with care and keep it clean.
b) Store the machine in a dry place out of the reach of children.
c) Always allow the machine to cool before storing.
d) When servicing the shredding means be aware that, even though the power source is switched
off due to the interlock feature of the guard, the shredding means can still be moved.
e) Replace worn or damaged parts for safety. Use only genuine replacement parts and
accessories.
f) Never attempt to override the interlocked feature of the guard.
g) Repair of the tool must only be carried out by a qualified repair technician. Repair or
maintenance by unqualified personnel can lead to a risk of injury.
5- Additional safety instructions for units with bagging attachments
Switch-off the machine before attaching or removing the bag.
6- Recommendation
a) The machine should be supplied via a residual current device (RCD) with a tripping current of
not more than 30 mA.
b) Avoid using the machine in bad weather conditions especially when there is a risk of lightning.