go!mate staep ER Plus Series, Руководство по эксплуатации

Страница: 25 / 28

| 25
On the mounting plate for the plank there are adjustment screws for the
joints #2 & #3. If the joints developed some play, open the joint and unsrew
the support surface by a quarter turn using a 4mm Allen wrench. With
joint #2, both support surfaces must be opened symmetrically. Close the
corresponding joint and check whether the play has been „unscrewed“ and
also ensure tight closure of the joints. If there is still play, unsrew the sup-
port surfaces a little further. If the joint cannot be closed tightly, screw the
support surfaces in slightly. With a few attempts, you will find the optimum
setting.
Regarding the screws you should regularly check the cap screws that hold
the wheels on the axle, the 12 screws on the underside of the plank and
the two screws on the fork bridges of the front fork for tightness.