go!mate staep ER Plus Series, Руководство по эксплуатации

Страница: 13 / 28

| 13
Handlebar and Front Wheel Alignment
Above joint #1 the height of the handlebars can be adjusted by using a clamp on
the head tube. Open the lever of the clamp to adjust the height of the handle-
bars.
Never drive with the clamp open. An unsecured handlebar presents
unnecessary risks to your personal safety.
The clamping force can be adjusted using the silver Allen screw. The clamping
has to reach the necessary strength so that the driver can fully rest his upper
body on the handlebars without the handlebars moving in height. If the handle-
bar moves, turn in the Allen screw. If the clamping lever cannot be fully closed,
unscrew the Allen screw slightly. The handlebars must be aligned exactly at
right angles to the front wheel.
The alignment from the handlebar to the front wheel is particularly impor-
tant, as it has a significant influence on the steering behaviour of the scoo-
ter. If you need to adjust the alignment, slightly open the two Allen screws
on the fork bridge of the standpipe. Adjust the front wheel accurately to the
centre of the plank and then align the handlebar to the correct position at a
right angle to the front wheel. The screws must be tightened with at least 12
NM.
Make sure that the screws of the fork bridge are always tighte-
ned. Driving with loose screws is life-threatening.