go!mate staep ER Plus Series, Руководство по эксплуатации

Страница: 22 / 28

22 |
The scooter‘s battery has a built-in battery management system, BMS. This system takes care of all relevant safety
functions and the safe charging process.
Charging the battery
To charge, remove the battery from the holder
in the scooter. Turn off the battery at the main
switch.
Place the battery on a safe, fireproof surface.
It should not be able to tip over when char-
ging. Connect the power supply to the mains
and plug the round plug into the charging
socket. The charging LED changes from green
to red and indicates the charging process.
The battery is fully charged when the LED is
permanently green. When the battery is fully charged it can be inserted back into the battery holder and put into
operation.
The battery is inserted laterally by holding it at an angle of approx. 45° to the
holder. Insert the noses on the battery into the holder and turn the battery into a
vertical position. Once the battery is inserted, it must be locked so that it cannot
fall out unintentionally.
Always recharge the battery after use, do not leave a dischar-
ged battery lying around for a long time. If the battery is deeply
discharged, no warranty can be given. Do not expose the battery
to extreme heat or cold and protect it from moisture.