go!mate staep ER Plus Series, Руководство по эксплуатации

Страница: 20 / 28

20 |
After you have assembled the scooter, insert the battery into the battery holder. Lock up the battery immediately
after insertion (see chapter Charge Battery). The interlock mechanism of the battery prevents it from falling out of
the holder. Switch on the battery at the bottle‘s On/Off main switch.
An unlocked battery may fall out while driving. The battery may be damaged caused by the impact.
Whenever your travel is interrupted set the main switch on the battery to Off.
The electric scooter is equipped with a BAFANG display on the hub motor (with spokes in the rear wheel). For a rim
motor (motor is fixed to the rim) an LCD-3 display is supplied. The function is described in the separate operating
manual. Please read these carefully before using the unit.
Press the On/Off switch for 5 seconds and turn on the display. Check the state of charge of the battery and switch
on the desired speed level. The throttle lever is active with a selected speed level. If it is pressed, the engine starts.
Multifunction LED
Warning: Only operate the drive lever if you really want to drive off. The engine develops a very high
torque. Operating the lever while stationary can knock the scooter out of your hands and injure
other persons.
The system can be turned off using the on/off switch. Press it for 5 seconds and the system will shut down.
Before you drive off, make sure that you have selected the correct speed level. We recommend that beginners and
older drivers select maximum speed level 4 for the rim motor. This results in a maximum speed of 20km/h which
usually is sufficient. Always bear in mind that a normal cyclist hardly reaches 20km/h in continuous operation.