background image

13

Guidelines and manufacturer's declaration - electromagnetic immunity

The 

Syncrus G8 Dental Chair

 is made to be used in the electromagnetic environments specified

below. The client or the user of the 

Syncrus G8 Dental Chair

 must be sure that it is used in

such environment.

Immunity

test

ABNT test level

NBR IEC 60601

Level of

compliance

Electromagnetic Environment

Directives

RF conducted

IEC 61000-4-6

RF radiated

IEC 61000-4-3

3 vrms

150 kHz up to 80 MHz

3 V/m

80MHz up to 2,5 GHz

3 Vrms

3 V/m

It is advisable that portable and mobile RF

communication equipment is not used 

near any part of the 

Syncrus G8 Dental 

Chair

, including cables, with a separation 

distance less than the one recommended, 

calculated from the equation applicable to 

the frequency of the transmitter.

Recommended separation distance:

d = 1,2√P

d = 1,2√P 80 MHz thru 800MHz

d = 2,3√P 800 MHz thru 2,5MHz

Where P is the nominal maximum power of

output of the transmitter in watts (W), as 

per the manufacturer of the transmitter, 

and d is the recommended separation 

distance in meters (m).

It is advisable that the fiel intensity from 

the RF, transmitter as determined by 

means of electric inspection on-site

a

,is 

less than the level of compliance in each 

frequancy range

b

.

There may be interference near the 

equipment

marked with the following symbol:

NOTE 1       At 80MHz and 800MHz, the highest frequency range applies.

NOTE 2    These directives may not be applicable in every situation. The electromagnetic 

transmission is affected by the absorption and reflection of structures, objects and people.
a - The field intensities set by the fixed transmitters, such as radio base stations, telephones 

(mobile phone, wireless) land mobile radio, amateur radio, AM and FM radio transmissions and TV

transmissions can not be predicted with accuracy. Due to the RF fixed transmitters is recommended

to install an electromagnetic inspection at the local in order to evaluate the electromagnetic 

environment. If at the place where the 

Syncrus G8 Dental Chair

 is be using the field intensity

level exceeds the conformity level for the RF above, is recommended to observe if the operations

are normal. Whether abnormal operations are observed, additional procedures shall be necessary

such as reorientation or replace the 

Syncrus G8 Dental Chair.

 

b - Whether above the frequency range of 150kHz to 80 MHz is recommended a field intensity

below than 3 V/m.

TECHNICAL SPECIFICATIONS

Содержание Syncrus G8





































Отзывы: