GNATUS Syncrus G8, Руководство пользователя

Страница: 23 / 36

23
Emergency Stop:
When pressing the “Emergency Stop” button (08), a LED will light and all chair movements will
automatically stop, and will remain blocked until the “Emergency Stop” (08) is pressed again. This
operation does not cancel the positions or the programming that has already been recorded. We
recommended that this function should be used during long surgical procedures, as the chair will
be blocked, therefore not allowing any unexpected movements.
Activation of the dental light:
To turn the light source on press the key (12) the light source will be turned on at the lowest
brightness level, to increase the brightness press the key again, to turn it off, press it once again.
ATTENTION:
For the Delivery Units (without Bien Air System) the key of the Foot control (04) will have the
function of inverting the rotation of the electric micromotor and the key (12) the activation of the
dental light.
Working Positions:
- The Syncrus G8 Dental Chair has four working positions. In order to program them, just place the
chair in the position and the dental light at the desired intensity and press and hold for 3 seconds
the “working position 1 and 2” button (01) or “working position 3 and 4” button (02) at the pedal;
the dental chair will sound a beep, and then two beeps in a row, entering cycle, then release the
button after the number of beeps regarding the working position you want to program.
- To select the first working position, touch once the button (01) of the pedal, for the second, two
consecutive touches.
To select the third or fourth position, repeat the same procedure using the button (02).
Button (01): 1 beep = 1ª working position
2 beep = 2ª working position
Activation of the dental light for the
Delivery Units (with Bien Air System)
Activation of the dental light for the
Delivery Units (without Bien Air System)
04 12 04 12
OPERATION OF EQUIPMENT
Button (02): 1 beep = 3ª working position
2 beep = 4ª working position