GNATUS Syncrus G8, Руководство пользователя

Страница: 27 / 36

27
To turn the massager on, press the key (06) and to turn it off, keep it pressed for one second. With
the massager already on, press the key (06) to select how much time it will remain on, 10 or 20
minutes, after that time the massager will automatically turn off. Check which time was selected
through the LEDs. After it is off, the massager may be turned on again.
Use key (04) to select among Wave, Continuous or Pulse modes. The selected mode may be checked
in the LEDs correspondent. The operator may choose for keeping only the backrest massager on,
or only the seat massager on, or both (except in the Wave mode where both remain on). For that,
use key (05) to select between “Zone 1” (backrest) and/or “Zone 2” (seat), the selection may be
checked in the LEDs correspondent.
The speed and intensity of the massager may be set with the “Menu” key (03) which selects what
will be edited and keys (02), which allow the setting of values from 0% to 99%, and such percentages
are shown in the right side of the display in green color (01).
When the “Menu” key (03) is activated, it will alternate in the left side in red color from numbers 1
and 2. When number 1: speed of the massager and when number 2: intensity.
Massager Control Functions
Wave Mode: In this mode, the massagers increase and reduce intensity over time, alternating from
the backrest massager and the seat massager, i.e., when one of them is more intense, the other
one is in its lower intensity. The speed and the higher level of intensity can be set. In this mode,
the massagers work jointly, and they cannot be individually activated.
Massage Mode
Modo Continuous: En este modo los masajeadores
operan de forma continua. La intensidad
puede ajustarse. Asiento y respaldo pueden
accionarse individualmente.
Modo Pulse: En este modo los masajeadores pulsan de
forma sincronizada. La intensidad y velocidad pueden
ajustarse. Asiento y respaldo pueden accionarse
individualmente.
OPERATION OF EQUIPMENT