ASSEMBLY
FRONT END
Front Suspension and Steering
Before installing please make sure all wheel are at the correct tyre pressure which is located on the wall of the tyre.
Lift bottom swing arm
into place at bottom of
shock absorber.
Insert bolt and attach
swing arm to shock
with bolt and nut
provided, tighten bolt
and nut.
Place lower front axle
steering bracket on lower
ball joint and fasten with
small castle nut, tighten
castle nut and insert split
and bend around castle nut.
THIS WILL BE REQUIRED ON BOTH SIDES LEFT AND RIGHT.
Place upper front axle
steering bracket on
upper ball joint and
fasten with small
castle nut, tighten
castle nut and insert
split and bend around
castle nut
1.
2.
3.
4.
4.
