Bicycle Cargo Trailer
›Stalwart Carry Fold 2‹
Owner’s Manual & Instructions
Please read through this manual and following the instructions before and during use.
1. Assembly of the wheels
Fixing the wheels: Please remove the two black protective caps on each wheel. Unscrew the parts marked”
inside“ in the picture from the quick-action tension jack and push the quick-action tension jack together with
the parts marked “outside“ through the wheel axle. Take one wheel and position it in the guide way provided in
the frame in such a way as to ensure that the quick-action tension jack lever is located
on the outside of the trailer. Now, remount the parts marked „inside” onto the quick-action tension jack,
observing the sequence shown in the picture and then tighten it. Please proceed along the same lines on the
opposite side with the other wheel.
PLEASE NOTE: Ensure that the retaining washers (a) are positioned in the recesses in the frame.
Compatible with hand cart towing bar (art. 640063)
illustration with hand
towing bar (art. 640063)
