GOVERNOR CHECK
Your 4 stroke GMX product can be governed down to the minimum (except 2 stroke as these require minimum of 80%)
STARTING
- Turn key barrel on and depress the brake lever to check if the brake light illuminates to make sure the electrical system is working.
- When starting your GMX quad you will need to hold down the brake caliper as this is a starting safety feature.
- Place fuel in fuel tanks and check for leak in all of the fuel system.
- Turn the fuel tap to the on position.
- Turn the key barrel to the on position.
- The carburetor will have a choke lever located on the side, when starting leave in the up position and after the quad has warmed up
(approx. 5-10 minutes) then place in the down position.
- Make sure the rear parking brake is on when starting your quad.
- Press the ignition button located on the left hand side of the handle bars and
Ride Away
.
START USING YOUR GMX BIKE
Once started, please let bike run 15-20 minutes prior to use.
ENJOY YOUR GMX BIKE!
If any questions or concerns please visit the link below
http://www.goeasyaustralia.com.au/support-centre
ASSEMBLY
11.
