GMX GE-YX125 series Скачать руководство пользователя

Страница: 15 / 18

CONNECTING BATTERY

- Remove seat from quad bike by releasing clip under seat and lifting off

- Battery and terminals are located below the seat

ASSEMBLY

Make sure when placing terminals on battery that the correct polarities are followed.

- Red for positive (+ sign on battery) and black for negative (- sign on battery)

DO NOT allow positive terminal lead to touch the metal frame.

- Check fuse on positive battery lead to make sure is intact

CHECKING OIL IN ENGINE

Please check oil in engine for correct level before starting. If engine oil is required please add or replace with 4 stroke oil (15-w40 motor cycle oil)

CHECK OVER BIKE

- Check all pre-assembled nuts and bolts as these have been found to be loose. It is the buyer’s responsibility to check these are all secure

before using the product

- We recommend using lock tight and the nuts can become loose over time with the vibration. Regularly check and tighten nuts and bolts

- Lubricate chain

- Look over all wires and make sure all plugs are connected and check for irregularities

- Throttle cable is moving freely through throttle

10.

Содержание GE-YX125 series



















Результаты поиска

Содержание GE-YX125 series

Отзывы:

Похожие инструкции для GE-YX125 series

Бренды по названию

Популярные бренды

GMX GE-YX125 series, Инструкция по сборке

Результаты поиска

Содержание GE-YX125 series

Отзывы:

Похожие инструкции для GE-YX125 series

Бренды по названию

Популярные бренды