21.
Manufacturer’s guarantee conditions
The TG uni 1 med appliance tester is subject to a strict quality inspection.
Nevertheless, we grant a 24 month manufacturer’s guarantee in the case of
malfunctions during normal daily usage.
Manufacturing or material faults will be remedied, free of charge, as long as
the device shows no signs of third party actions and is unopened before it
is sent back to us.
Damage resulting from the device being dropped or mishandled is excluded
from guarantee claims.
Subject to errors and technical modifications!
CE
Gilgen, Mueller & Weigert Nuremberg (GMW)
Zweigniederlassung der General Elektronik GmbH
Am Farrnbach 4A
•
D-90556 Cadolzburg
T49 (0)9103 7129-0
T49 (0)9103 7129-205/207
E-mail: [email protected]
•
Internet: www.g-mw.de
2786688240 04.2013
20. Note on using the internal memory or external memory (MMC/
SD card) of the appliance tester
The MMC/SD memory card can be read as described, deleted and
formatted with File Manager from the Windows® - Surface.
Using the included USB cable to connect the device tester with the PC on
which to automatically create a new Removable Disk Drive reports. You
can also use the, possibly on the PC available, card reader.
The contents of internal memory, only by copying the data to the memory
card can be edited (page 12, Figure 12).
The following points should be observed when working with the memories:
– When storing data during a measurement the „TG-MMC.DAT“ file is
automatically created. If the file already exists the subsequent data
records are attached to the existing data.
– If files in the memory are changed by means of the file manager, only
short filenames and file types may be used (filename: 8 characters,
file type: 3 characters).
–
WARNING! Failure to observe this restriction will destroy all
existing data on the media!!!
– If a file on the removable media (MMC/SD card) is renamed, only the
file type must be changed (e.g. „TG-MMC.DAT“ to “TG-MMC.001").
– Multiple files with a „DAT“ file type may not exist on the media.
The above points refer only to work with the existing memories in the
appliance tester. If you copy the file to a PC hard disk you may also use
long filenames and process them using the supplied „TGUNI1PROT.EXE“
PC program.
The
[delete] button
in the configuration menu (page 2) is available for
deleting the media. You can change the selected memory via the
[memory] button
.
You can also erase the memory using the PC file manager.
Operating manual for the TG uni 1, TG euro 1 and TG euro 1 med appliance tester
