4
Operating manual for the TG uni 1, TG euro 1 and TG euro 1 med appliance tester
Safety information
1.
Safety information
Tests on the electrical safety of electrical appliances may only be carried
out by qualified electricians or under their supervision. Carefully read
through the following safety information before starting up the appliance
tester.
Symbols used in the operating manual and on the appliance tester:
Warning: hazardous situation. Follow the operating manual.
Caution! Dangerous voltage, danger of electric shock.
Note. Make sure you follow the manual.
CE
CE mark of conformity.
The operating manual contains information and notes which are
necessary for the safe operation and use of the appliance tester.
Before using (starting up/installing) the appliance tester, the
operating manual should be carefully read through and followed in
all points.
If the manual is not observed or if you fail to observe the warnings
and notes, serious injury to the user and damage to the appliance
tester can occur.
All the technical data and quoted standards in this manual are up-
to-date at the time of going to press and have been determined to
the best of our knowledge, nevertheless this data may be subject
to errors and printing errors. Therefore no legal responsibility or
any other liability can be accepted for incorrect information or the
consequences of this information.
The respective provisions,
regulations and standards are the authorities defining the
procedures to be followed when conducting tests.
There is
no intention to infringe on any existing patents and other property
rights with this publication.
2.
Introduction
You have acquired a high-grade device from the company Gilgen, Mueller
& Weigert Nuremberg (GMW) with which you can carry out repeatable
measurements over a very long period of time.
The product was calibrated during the manufacturing process in accordance
with the specified operating procedures.
