Operating manual for the TG basic 1 appliance tester
Gilgen, Müller & Weigert
4
2. Introduction
You have acquired a high-grade device from the company
Gilgen, Müller & Weigert with which you can carry out repeatable
measurements over a very long period of time.
The product was calibrated during the manufacturing process in
accordance with the specified operating procedures.
The TG basic 1 appliance tester, hereafter referred to as the
tester, has been developed for carrying out the following
measurements for testing the safety of electrical appliances in
accordance with DIN VDE 0701-0702 (BGV A3):
- Measuring the protective conductor resistance
- Measuring the insulation resistance
- Measuring the substitute leakage current
- Testing of IEC and extension cables
- Measuring the power socket voltage
Scope of delivery
1 qty
TG basic 1 appliance tester
1 qty
set of measuring accessories with safety test line, safety
crocodile clip and safety test tip
6 qty
batteries of type AA (Mignon)
1 qty
IEC connection cable, 0.5 m
1 qty
carrying bag
1 qty
operating manual
Transport and storage
Please retain the original packaging for dispatch at a later date,
e.g. for calibration.
Transport damage that occurs due to inadequate packaging is
not covered by the manufacturer’s guarantee.
The appliance tester must be stored in a dry, closed room. If the
device is transported in extreme temperatures, it requires at least
2 hours acclimatisation before being switched on.
