Page 12
General Machine Products (KT), LLC
Method 2:
Open the belts fully using the ad-
justment wheel and lift the magneti-
cally held guard flap.
Remove the top half of the cable
guide insert. Ensure the correct
cable guide inserts are fitted for
the cable (see appendix 1 and
section 9).
Open the airbox and remove the
top half of the cable seal collet.
Ensure the correct collets are
fitted (see appendix 1 and sec-
tion 8).
Select the appropriate split cable
seal (see appendix 1) and posi-
tion it around the cable.
Take the cable and simultane-
ously place it into the duct and
into the air box. Thread it be-
tween the belts. Ensure the ca-
ble seal seats in the appropriate
groove in the cable seal collet.
Replace the top halves of the
belt infeed guide and cable
seal collet. Close the airbox
and tighten the thumbnuts.
