5. Device Operation
GME LinScan Revision 14, dated 2016-06-08
Page 29 of 46
5.9 Switching off
To switch the device off, press the On /Off button in the middle of the front panel of the device. Wait
until the LED color changes from green to blue/red (depending on the device version). Then you can
turn off the power completely at the main switch on the left side of the device.
In an emergency, the unit can be switched off be pressing the red emergency stop button on the top of
the base unit. Any laser emission is stopped immediately. The LED on the front panel turns to
white/red (depending on the device version). If the button has been pressed, it must first be unlocked
by turning the button. Otherwise the device cannot be switched on again.
Always switch off the power using the main switch before performing cleaning or maintenance work or
before moving the unit.
