GMDE GEatom 306KTL
Global Mainstream Dynamic Energy Technology Ltd.
25
*3.4.5 Power Meter Installation
(This section is only for the Integrated Energy Management Solution in section 2.1 General System
The wire connection of power meter is shown as below:
1)
Connect the AC grid to the power meter on the “↑” marked side. Connect the load on the other
side. Pay attention to the Neutral line connection.
2)
Connect the RS485 cable to the power meter according to section 3.4.4 Communication Interface
Port: connect the terminal “7” with the pin 3 Data+; connect the terminal “8” with the pin 6
Data-(Table 4).
Wire connection
Connecting direction
RS485 connection-1
RS485 connection-2
Figure 19 Wire connection of power meter
From AC GRID
