GM-Racing XG-6 Скачать руководство пользователя

Страница: 12 / 24

03 94011 GM-Racing XG-6 Race Spec Instructions

English

2. STEERING RANGE (ST.D/R)

D/R is used to change the action range of steering servo when turning the steering wheel.
Increasing D/R will make the steering wheel action more sensitive. --D/R adjusting value
range: 0~120%, POS0 default value is 100%, POS1 default value is 70%. Press the ST.D/R
dial to select POS0 or POS1, and the value will display in the LCD when it is on the main
screen.
1.  Press “ENTER” to see FUNCTION MENU.
2.  Press “+” or “-“ to choose D/R, and press “ENTER” to enter D/R adjusting inter-
face.
3.  Press “+” to increase and “-” to decrease D/R value.
4.  Press “EXIT”to save your setting and leave D/R interface, and back to the function
menu

interface.

3. SUB-TRIM (SUB TRIM)

Use this function to adjust the neutral position of the steering
and throttle servos. SUB TRIM adjusting value range: -100 -
100. Default is 0.
1. Press “ENTER” to see FUNCTION MENU.
2. Press “+” or “-“ to choose TRIM, and press “ENTER”

to enter SUB TRIM adjusting interface.

3. Press “+” to increase and “-” to decrease SUB TRIM
value.
4. Press “EXIT” to save your setting and leave SUB TRIM interface, and back to the

function menu interface.

1. END POINT ADJUSTMENT (EPA)

Use this when performing left and right steering angle adjustments, throttle high side/
brake side operation amount adjustment, and channel 3 servo up side/down side operati-
on amount adjustment during linkage. EPA adjusting value range: 0~120 %, default is
100%
1. Press “ENTER” in the power on interface and enter function menu. Press “+” or

“-” to choose “EPA”. And press “ENTER” and enter EPA adjusting interface.

2. Press “ENTER” to choose each adjusting item, and then press “+” to increase and

“-” to decrease the value of the corresponding item.

3. Press “EXIT” to save your setting and leave EPA interface, and back to the function

interface.

94011 GM-Racing XG-6 Race Spec Instructions 12

English

Konformitätserklärung gemäß dem Gesetz über Funkanlagen und

Telekomunikationsendeinrichtungen (FTEG) und der Richtlinie 1999/5/EG (R&TTE)

Declaration of Conformity in accordiance with the Radio and Telecomunikations Terminal Equipment

Act (FTEG) and Directive 1999/5/EG (R&TTE)

Graupner GmbH & Co. KG
Henriettenstraße 94-96
D-73230 Kirchheim/Teck

erklärt, dass das Produkt:

declares that the product

Verwendungszweck:

Funkanlage zur Fernsteuerung von Modellen

Intended purpose

Radio equipment for remote controlling of models

Geräteklasse:

Equipment class

bei bestimmungsgemäßer Verwendung den grundlegenden Anforderungen des § 3 und den
übrigen einschlägigen Bestimmungen des FTEG (Artikel 3 der R&TTE) entspricht.

complies with the essential requirements of § 3 and the other relevant provisions of the FTEG (Article 3 of the
R&TTE Directive), when used for its intended purpose

Angewendete harmonisierte Normen:

Harmonised standards applied

60950:2006

Gesundheit und Sicherheit gemäß § 3 (1) 1. (Artikel 3 (1) a))

Health and safety requirements pursuant to § 3 (1) 1. (Article 3 (1) a))

EN
EN

301 489-1 V1.8.1
301 489-3 V1.4.1

Schutzanforderungen in Bezug auf die elektromagnetische
Verträglichkeit § 3 (1) 2, Artikel 3 (1) b))

Protection requirement concernig electromagnetic compatibility
§ 3 (1) 2, Artikel 3 (1) b))

EN 300 220-1 V2.1.1

Maßnahmen zur effizienten Nutzung des Frequenzspektrums
§ 3 (2) (Artikel 3 (2))

Measures for the efficient use of the radio frequency spectrum
§ 3 (2) (Article 3 (2))