09 94001 GM-Racing XG-6i Race Spec Instructions
English
9. SERVO SPEED (SPD)
This function include tow items: STEERING SPEED and THROTTLE SPEED.
1. Press “ENTER” to see FUNCTION MENU
2. Use the +/- Keys to select the SPEED function and press ENTER.
3. Press ENTER to select a setting.
4. Use the +/- Key to change the value.
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to
return to the Main Screen.
2.THROTTLE SPEED
- Sudden throttle trigger operation on a slippery road only causes the wheels to spin and
the vehicle cannot accelerate smoothly. Setting the throttle speed function reduces wasteful
battery consumption while at the same time permitting smooth, enjoyable operation.
- Throttle servo (amp) operation is delayed so that the drive wheels will not spin even if the
throttle trigger is operated more than necessary. This delay function is not performed when
the throttle trigger is returned and at brake operation.
Adjustment:
1. Select the TH button by +/- Keys.
2. Press Enter to select SPD. FL item.
3. Use +/- Keys change the value.
4. Press exit twice return to the function menu.
TERMS:
SPD.FL- SPEED FORWARD DELAY. Range:0~100%, default:0
SPD.Bk- SPEED BACKWARD DELAY. Range:0~100%, default:0
Quick steering operation will cause momentary under steering, loss of speed, or spinning.
This function is effective in such cases. This function limits the maximum speed of the stee-
ring servo. (Delay function)
-
The steering speed when the steering wheel is operated (TURN direction) and
returned (RETN direction) can be independently set.
-
If the steering wheel is turned slower than the set speed, the steering servo is not
affected.
94001 GM-Racing XG-6i Race Spec Instructions 10
English
10. AUTOMATIC START (ATS)
When the throttle trigger is set to full throttle simultaneously with starting when the track is
slippery, the car wheels will spin and the car will not accelerate smoothly. When the Start
function is activated, merely operating the throttle trigger slowly causes the throttle servo to
automatically switch from the set throttle position to a preset point so that the tires do no loose
their grip and the car accelerates smoothly.
-
When the throttle trigger is moved to the preset trigger position (TRI), the throttle servo
moves to the preset position (POS).
-
When the throttle trigger is operated slowly so that the wheels will not spin, the car auto-
matically accelerates to the set speed.
-
This function is effective only for the fi rst throttle trigger operation at starting. This func-
tion has to be activated before every start.
-
When the throttle trigger is returned slightly, the Start function is automatically deactiva-
ted and the set returns to normal throttle trigger operation.
1. Press “ENTER” to see FUNCTION MENU
2. Use the +/- Keys to select the ATS function and press ENTER.
3. Press ENTER to select TRI (Throttle Trigger) item. Use +/- to change the value. Range:
-
100%~+100%..
4. Press ENTER to select POS (Preset Position) item. Use +/- to change the value. Range:
0%~100%.
5. Press ENTER to select DLY (ATS delay time) item. Use +/- to change the value. Range:
0~100.
6. Press ENTER to select MOD (ATS Ready setting) item. Use +/- to change INH or RDY.
7. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to return to
the Main Screen.
11. MODULATION (MODULATE)
With this function the transmitter and receiver are bound together. This function was already
described on page 2.
12. BRAKE MIX (BK-MIX)
When using a secondary brake system set the BRAKE MIX value to a percentage of the
Throttle Brake. This mixing uses the 2nd channel to control the rear brakes and the
3rd channel to control the front brakes. This function can be used in conjunction with the TH
TRIM and TH EPA to fi ne tune the power and balance of the overall braking system.
1. Press “ENTER” to see FUNCTION MENU
2. Use the +/- Keys to select the BR_MIX function and press ENTER.
3. Press ENTER to select a item.
4. Use the +/- Key to change the value.
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to
return to the Main Screen.
TERMS:
RATE -- the rate of brake between 3rd channel and 2nd channel. Default value: 0 -120%.
EN -- the start or close switch of this function. Select “ON” to start the function, and “OFF”
to close the function.
94001-eng.indd Druckbogen 10 von 10 - Seiten (10, 11)
94001-eng.indd Druckbogen 10 von 10 - Seiten (10, 11)
19.01.2009 08:02:49
19.01.2009 08:02:49
