13 94001 GM-Racing XG-6i Race Spec Instructions
English
18. RESET FACRORY SETTING (RESET)
All the setting in the system will be reset to the default
values by this reset function. It takes about 30 seconds.
1. Press “ENTER” to see FUNCTION MENU.
2. Use the +/- Keys to select the RESET function and press
ENTER.
3. Press ENTER to reset the XG-6i memory.
4. Press “EXIT” twice to save and return to FUNCTION
MENU, press EXIT again to return to the Main Screen.
17. SOUND
This function can open or close the buzzer sounding.
1. Press “ENTER” to see FUNCTION MENU
2. Use the +/- Keys to select the SOUND function and press ENTER.
3. Use the +/- Keys to select INH or ACT.
4. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to
return to the Main Screen
19. RESET MODEL MEMORY (MODEL RESET)
This function will reset the data of the current model memory to default values.
1. Press “ENTER” to see FUNCTION MENU.
2. Use the +/- Keys to select the M_RES function and press ENTER.
3. Use the +/- Keys to select YES
4. Press ENTER to reset the data
5. Press EXIT twice to save and return to FUNCTION MENU, press EXIT again to
return to the Main Screen.
94001 GM-Racing XG-6i Race Spec Instructions 06
English
ADJUSTMENT METHOD FOR VTR-CURVE
Select VTR at setup item “M”, Select setup item “R” and make the following adjustments:
1.
Forward side adjustment:
Use the (+) button to adjust the + side when you want to quicken the rise and use the(-)
button to adjust the side when you want to make the rise milder.
2.
Curve switching point adjustment:
When you want to change the curve switching point relative to the
throttle trigger, select the setting item „P“ by ENTER button, and use the (+) and (-) but-
tons to move to the point you want to set.
3. When ending setting, return to the initial screen by pressing the EXIT.
ADJUSTMENT METHOD FOR CUR CURVE
Select CUR at setup item “M”, select setup item “R” and make the following adjustments:
1.
Curve setup:
Select the setting item „1:“ (1st point), by ENTER button and use the (+) and (-) buttons
to set the 1st point.
Set the throttle curve by sequentially setting „2:“ (2nd point)~ „3:“ (3th point).
2. When ending setting, return to the initial screen by pressing the EXIT.
TERMS: M-MODE, R-RATE,BR-BRAKE, VTR-VERTICAL, CUR-CURVES, P-TRIGGER
POS, 1~3-Curves point 1~3.
94001-eng.indd Druckbogen 7 von 10 - Seiten (14, 7)
94001-eng.indd Druckbogen 7 von 10 - Seiten (14, 7)
19.01.2009 08:02:47
19.01.2009 08:02:47
