Glunz & Jensen Plate Processor 150, Руководство по установке

Страница: 19 / 40

Installation requirements for power supply
The table below indicates the applicable power supply types and recommended cable
types and which processor models they apply to:
Supply / Fuse Recom. Cable type 150
EUR
1W + N + PE, 230 VAC,
1 x 25 A, 50/60 Hz. Min. 3 x 2.5 mm²,
type H07RNF
·
3W + N + PE, 400 VAC,
3 x 15 A, 50/60 Hz. Min. 5 x 2.5 mm²,
type H07RNF
·
US
2W + PE, 230 VAC,
2 x 25 A, 50/60 Hz. Min. 3 x 12 AWG,
type SJO
·
3W + PE, 230 VAC,
3 x 20 A, 50/60 Hz. Min. 4 x 12 AWG,
type SJO
·
JAP
2W + PE, 200 VAC,
2 x 25 A, 50/60 Hz. Min. 3 x 12 AWG,
type SJO
·
3W + PE, 200 VAC,
3 x 20 A, 50/60 Hz. Min. 4 x 12 AWG,
type SJO
·
Max power consumption 150
EUR/
US
230/400 VAC operation:
5,100 Watt / 17,400 BTU/hour
·
Stand-by:
Approx. 500 Watt / 1,710 BTU/hour
·
JAP
200 VAC operation:
3,900 Watt / 17,400 BTU/hour
·
Stand-by:
Approx. 500 Watt / 1,710 BTU/hour
·
All Voltage tolerance ± 10%
·
1049 Installation Manual - Plate Processor 150
2-11
Installation
Electrical specifications