GLP Santinel Cellular, Руководство пользователя

Страница: 16 / 36

www.glp.de
GLP Santinel User Manual 16
DOWN
and UP
The [DOWN] and [UP] arrows let you scroll down and up through menus or menu items.
LCD display while using the control panel
When you activate the control panel, the LCD display on the front of the Santinel
shows the control menus (see Figure 8).
V1.0.0-rc
LTE
Volume
Dispensed volume
Dispensed units
Aborted dispenses
Remaining units
2.0ml
~1.658l
648
26
~1671
Figure 8. LCD display – main information screen
The top line of the display shows the firmware version, shows whether the Santinel is
connected to Wi-Fi or the cellphone network and indicates signal strength with four
bars. In Figure 8, the Santinel is running firmware version 1.0.0. It is connected to a
cellphone network (LTE) and the signal strength is excellent.
The rest of the display shows the control menus. In Figure 8, the Santinel is showing the
main information display that is called up with one press on [MENU/BACK]. Pressing
[MENU/BACK] twice calls up the full control menus described in the rest of this section.
Using the control panel
The following readouts and functions are available in the control panel (see also
‘ Control menus overview ’ on page 23 for a table showing the menu structure):
Replace Canister - Resetting the dispenser counters
Each time you replace an empty disinfectant fluid container with a new one, it is a
good idea to reset the dispenser counters so that you can monitor how much
disinfectant fluid is being used and how often the Santinel is activated. To reset the
counters, open the control menus and go to
Information
→
Counters , then press and
hold [ENTER] for 3 seconds (or press [MENU/BACK] to cancel and escape).