GLP Fusion Stick FS20, Быстрый старт и руководство по безопасности

Страница: 26 / 32

www.glp.de
26 Fusion Stick FS20
Quick Start and Safety Manual Rev. A
8. Starting and stopping operation
Warning! Before you apply power to the fixture or operate it after a
blackout, make sure that nobody is looking directly into the front of the
fixture.
The FS20’s TRUE1 mains power input connector supports hot-plugging, and connecting
and disconnecting a live power cable is an option, especially if you need to shut down
power urgently, but it is still good practice to shut down power to the AC mains power
circuit before connecting and disconnecting power cables.
To start operation, check that nobody is looking into the front of the fixture, then apply
power to the AC mains power circuit.
To stop operation, shut down power to the AC mains power circuit.