GLP Creative Light 1, Руководство пользователя

Страница: 36 / 54

www.glp.de
CL1 / CL1+ User Manual
36
13. Control menus
This chapter gives the contents of the menus in the control panel on the front of the
CL1.
The menu items marked in yellow are available in the CL1+ only.
DMX Address
1 -512 Set fixture’s DMX address
Control Mode
M1 - RGB
All LED pixels controlled together.
Controllable color and intensity plus
shutter/intensity effects and a
Control/Settings channel.
M2 - Pattern
Global intensity and shutter control. Color
control of all LED pixels together in base
layer.
Top layer (Layer 2) with patterns can be
superimposed onto base layer.
M3 - MultiPix
Global intensity and shutter control.
Individual color control of each LED pixel.
Signal Settings
Signal source
CRMX
Only CRMX signal is active, all other control
signal sources are ignored
iQ.Mesh
Only iQ.Mesh signal is active, all other
control signal sources are ignored
Manual / IR Remote
Fixture controlled by its own control buttons
and display or by infrared remote if IR
Remote is enabled (see below)
CRMX
Link/Unlink
Unlinked / Linked
Shows current CRMX linking status. Press
ENTER to unlink (confirm 3s)
iQ.Mesh
Link/Unlink
Unlinked / Linked
Shows current iQ.Mesh linking status. Press
ENTER to unlink (confirm 3s)
IR Remote
control
On/Off
On / Off
Fixture responds to / ignores signal from
infrared remote
Fixture Settings
No-signal
behavior
Blackout
If no control signal present, fixture blacks
out
Hold last value
If no control signal present, fixture continues
to use last valid control signal received
Manual Control
If no control signal present, fixture goes into
manual control mode
Mic sensitivity 01 … 05 … 10
Adjust sensitivity of audio triggering
microphone, low ( 01) to high (10) sensitivity