GLP Creative Light 1, Руководство пользователя

Страница: 24 / 54

www.glp.de
CL1 / CL1+ User Manual
24
9. Creative Light app control
If you select SIGNAL SOURCE → iQ.MESH in the SIGNAL SETTINGS menu (you can also
press and hold the DOWN button to scroll through the control signal sources), you
can control the CL1 using the GLP Creative Light smartphone app.
Using the Creative Light app, a smartphone can communicate with CL1 fixtures
using GLP iQ.Mesh technology in which each fixture is capable of relaying data to
other fixtures. The mesh system allows wireless control of networks over large
distances.
You can find guidance about using the Creative Light app in the app itself once you
have installed it, so this manual only gives you brief instructions to get you started.
Note that the Creative Light app is constantly being updated, and the appearance
of the app may differ from the screenshot pictures given in this section. This user
manual will be updated to match the app, so make sure that you have the latest
version of this user manual.
Setting up the iQ.Mesh network
To control an installation containing CL1 fixtures with the Creative Light app, you
must first link the fixtures to and configure the iQ.Mesh network. To do this:
Download the GLP Creative Light app from the App Store (iOS) or Play Store
(Android). Pointing your smartphone at the correct QR code for your smartphone
in Figure 9 will take you to the app:
Switch on all the CL1 fixtures and open the control panel menus. Make sure that
each fixture is unlinked from older iQ.Mesh Networks before linking. To unlink a
CL1, either:
•
go to SIGNAL SETTINGS → iQ.MESH LINK/UNLINK and unlink the CL1, or
•
use a shortcut by pressing and holding the ENTER button for 6 seconds to load
factory backup. This will return the CL1 to factory settings and delete any links
to CRMX or iQ.Mesh.
Figure 9. QR codes to obtain GLP Creative Light app