German Light Products®
15
Rev.
20210303-01
You can also charge multiple
CL1 devices using the docking stations in the Creative
Light 1 charging tourpack case that is available as an optional accessory from GLP
suppliers. Leave the case open during charging.
See Figure 4. You can monitor the
charging process as follows:
•
During charging, the first LED pixel
flashes green (
A
) and the CL1’s display
shows a charging symbol.
•
When the CL1 is fully charged, the first
LED pixel lights constant green (
B
) for as
long as the CL1 is connected to the
charger.
•
When you disconnect the CL1 from the
charger, the first LED pixel switches off
(
C
).
Transport lock
The CL1 ships with the transport lock applied. To unlock the CL1 when the transport
lock is applied, connect it to a charger.
If you are going to transport the CL1 or put it into long-term storage, apply the
transport lock. This disables all control buttons. To unlock the CL1 when the transport
lock is applied, connect it to a charger.
Powering on and off
See Figure 5. To switch on the CL1, press and
hold the MENU button for 3 seconds. The CL1’s
LEDs will light up white in a circle show you that
the fixture is starting up. The CL1 is now ready to
use and you can start configuration.
To switch off the CL1 while it is powered on,
press and hold the MENU button for 3 seconds.
The CL1’s LEDs will light white and then turn off in
a counterclockwise circle to show you that the
CL1 is shutting down. You can now store the CL1
without draining the battery.
Figure 4. Charging status
Figure 5. Powering on
Содержание Creative Light 1
Страница 1: ...Revision 20210303 01 User Manual Creative Light 1 CL1 Creative Light 1 Plus CL1...
Страница 54: ......
