GLP Creative Light 1, Руководство пользователя

Страница: 22 / 54

www.glp.de
CL1 / CL1+ User Manual
22
Pattern color
The color presets available when using the remote control unit are as follows:
Red
(CW01)
Green
(CW02)
Blue
(CW03)
White
8000K
Orange
(CW08)
Yellow
(CW06)
Light blue
(CW11)
White
4200K
Amber
(CW14)
Lime Green
(CW20)
Pink
(CW09)
White
2700K
Note that a wider range of color presets is available using the fixture’s control panel.
Pattern Effects
When you select a pattern effect, the pattern will always start with a default color
and run at medium speed. Once you have selected the pattern preset, you can
change the speed and color of the pattern using the PATTERN COLOR and SPEED
buttons. 16 pattern effects are available:
•
Pattern 00 is the “open” pattern and will enable all 24 pixels. You can set the color
by using the COLOR PRESET buttons.
•
Patterns 02 to 07 are dynamic patterns over a black background. You can select
the pattern color by using the COLOR PRESET buttons.
•
Patterns 08 to 15 are dynamic patterns over a fixed color background. You can
select the pattern color using the COLOR PRESET buttons. You cannot change the
background color with the IR remote control unit (but you can change the
background color using the MANUAL CONTROL menu in the CL1’s integrated
control panel.
Note that a wider range of effect patterns is available using the fixture’s control
panel.
Effect Speed
You can control the speed of a dynamic pattern using the SPEED UP and SPEED
DOWN buttons. When you first select a pattern, it runs at medium speed until you
adjust the speed using these buttons.
Global Intensity / Blackout
The DIMMER UP and DIMMER DOWN buttons control global light output intensity.
You can use the BLACKOUT button to temporarily toggle between light output and
no output. The BLACKOUT button will only toggle output on and off: it will not change
the selected dimmer value.