REV. 01 2020
CHAPTER 3 – TRANSPORTATION
3.1 TRANSPORTATION
•
The machine must be transported
and kept in the position shown
•
The packaged machine may
truck of suitable capacity.
in figure 2.
3.2 UNPACKING
•
Remove the protective cardboard
•
Remove the fixing bolts from the packing pallet.
•
Check that the equipment
missing. Use fig. 1 for reference.
If in doubt do not
3.3 STORAGE
Packages must be stored in a covered place, out of direct sunlight and in low humidity, at a
temperature between -10°C and +40°C.
In the event of storage for long periods of time, be sure to
the clamp sliding guides on the turntable to prevent them from
7 / 28
TRANSPORTATION, UNPACKING AND STORAGE
transported in its original packaging
shown on the package itself.
may be moved by means of a fork lift
. Insert the forks at the points shown
cardboard and the nylon bag.
Remove the fixing bolts from the packing pallet.
equipment is in perfect condition, making sure that
reference.
not use the machine and contact your retailer.
Packages must be stored in a covered place, out of direct sunlight and in low humidity, at a
and +40°C.
In the event of storage for long periods of time, be sure to disconnect all sources of power and grease
the clamp sliding guides on the turntable to prevent them from oxidizing.
Fig. 2
AND STORAGE
no parts are damaged or
retailer.
Packages must be stored in a covered place, out of direct sunlight and in low humidity, at a
disconnect all sources of power and grease
Fig. 2
