REV. 01 2020
20 / 28
6.4.5 SPLIT FUNCTION
The SPLIT function is used to position the adhesive weight behind the wheel spokes so that they are
no longer visible. It is advisable to use this function only in the static unbalance or in the
☆
ALU
mode.
Input the wheel data and start the spin. To start the SPLIT function, in the following data for an
example:
Fig. 24
At
☆
ALU
mode, the unbalanced amount of the
outer side of the rim shown on the digital
readouts is 30g.
Press to SPLIT function.
Choose the first spoke of two adjacent spokes.
Rotate the wheel to move the first spoke to 12
o’clock position.
Press to memorize the position.
Choose the second spoke of two spokes.
Rotate the wheel to move the second spoke to
12 o’clock position.
Press to memorize the position.
Move the first spoke back to the memorized
position. Brake the pedal and then apply the
adhesive weights on the position according to
the unbalanced amounts shown on the digital
readouts.
Move the second spoke back to the memorized
position. Brake the pedal and then apply the
adhesive weights on the position according to
the unbalanced amounts shown on the digital
readouts.
To exit SPLIT function, press and
then .
.
