REV. 01 2020
15 / 28
6.3
WHEEL DATA ENTRY
Before balancing a wheel, wheel data must be entered.
6.3.1
WHEEL DATA
Fig. 12 – STANDARD MODES Fig. 13 –
☆
ALU
MODE
For STANDAD MODES, measure the wheel dimensions as shown in the figure 12.
For
☆
ALU
MODE, measure the wheel dimensions as shown in the figure 13.
In this machine, A and D values also can be entered either manually or automatically.
At special request, the machine can be supplied with the automatic B gauge.
6.3.2
AUTOMATIC ENTRY OF A/D
•
Move the A/D gauge to measure the A and D dimensions as
shown in the figure 14. The dimensions A and D are determined
and set automatically, and a beep sound is heard in the
meantime.
6.3.3
AUTOMATIC ENTRY B (optional)
•
Move the B gauge to measure the B dimension as shown in the
figure 15. The dimension B is determined and set automatically.
Fig. 14
Fig. 15
