REV. 01 2020
18 / 28
6.4.4
☆
ALU
MODE
This is a special ALU mode for precise and fast application of the adhesive weights on the rim by
means of the automatic gauge. There are two modes of ALU1
☆
and ALU2
☆
.
Press to select ALU1
☆
mode.
Choose two positions on the rim where can be applied with the adhesive weights and then measure the
dimensions as shown in the diagram (Fig. 20).
Pay attention to press to memorize A1 dimension which should be measured at first, then
measure AE dimension which will be memorized automatically.
Fig. 20
Press
After performing the balancing spin, pull the gauge to the inner and outer position separately until “0”
is shown on the digital readouts, where to apply the adhesive weights
Fig. 21
For an example
A1 = 92
AE = 241
dI = 13.5
dE = 12.5
