206M 201805
4
3. Technical data
External locking rim dimensions
6~24
＂
Max. Wheel diameter
1040mm(41
＂
)
Max. Wheel width
270mm(10
＂
)
Working Pressure
8-10bar
Power supply
110V (1ph)/ 220V (1ph)/ 380V (3ph)
Optional Motor power
0.75/1.1 kw
Max. Rotating Torque (Turntable)
1078 Nm
Overall Dimension
960*760*1080mm
Noise Level
<75 dB
Remark:
Rim dimensions
defined
at
above table are based on the
iron wheel
rims
.
Aluminum
rims are
thicker
than
the
iron
wheel
rims
,
so here above rim dimensions are just for the reference
.
Here
above machine versions
can be equipped with
Rapid Tire Inflation Device (client optional device), IT-suffix version,
accessory
details
can be found at
the
IT-suffix version
diagram
.
4. Transport:
When transporting, the machine should be with original package and placed according to the mark on the package. For the
already packaged machine should be handled with a corresponding tonnage forklift for loading and unloading. The location
to insert the fork feet shown as
Fig 1
5. Unpacking & Inspection:
Pull out the nail which is nailed on the plate with tip jaw; unpack the carton and plastic cover. Check and make sure all parts
shown on the spare parts list are included. If any parts are missing or broken, please do not use the machine and contact the
manufacturer or dealer ASAP.
Fig 1 Fig 2
Fig 3
6. Workplace requirements:
Choose workplace in compliance with safety regulations. Connect power supply and air source according to manual and
workplace must have good air condition; in order to make the machine run well, its workplace requires at least clear space
from each wall shown as
Fig 2
. If installing it outdoor, it must be protected by roof against rain and sunshine.
Warning: the machine with motor must not be operated in explosive atmosphere
.
