Glomex DANUBE NEO R500N, Руководство пользователя и инструкция по установке

Страница: 95 / 146

93
www.glomex.it
DANUBE “NEO”
(R500N - R500N/DCSS)
ENGLISH
7. Intermittent images for short
periods
- the satellite signals are
obstructed by trees, buildings,
overpasses, mountains
- move the vehicle to allow an
unobstructed view for the
antenna
- the vehicle is at the boundary
of the coverage area
- bad weather conditions
- go back within the coverage
area; refer to the footprints of
the coverage areas on page
88 in this manual
- wrong SKEW adjustment - adjust the SKEW by following
the instructions on page 67
- turn off and on again the
antenna
- turn off and on again the
antenna
8. The equipment does not find
the satellite (the led on the
control unit is red)
- the satellite signals are
obstructed by trees, buildings,
overpasses, mountains or
attachments installed on the
vehicle roof
- move the vehicle to allow an
unobstructed view for the
antenna or correctly position
the antenna on the vehicle roof
- the vehicle is outside the
signal coverage area
- go back within the coverage
area; refer to the footprints of
the coverage areas on page
88 in this manual
- bad weather conditions - switch off the device for 10
seconds, switch it back on and
make sure that the vehicle is
stopped
- wrong SKEW adjustment - adjust the SKEW by following
the instructions on page 67
- inner failure - contact the Service Centre
9. The equipment does not find
the satellite (the led on the
control unit flashes alternately
red and orange)
- the satellite signals are
obstructed by trees, buildings,
overpasses, mountains
- move the vehicle to allow an
unobstructed view for the
antenna
- the equipment software is not
up to date
- please contact the Service
Centre to ask for the software
update by SD card
- wrong SKEW adjustment
- bad weather conditions - adjust the SKEW by following
the instructions on page 67
10. The equipment does not find
the satellite (the led on the
control unit is orange and
remains orange also when
moving the vehicle)
- parameters in satellite
communication have changed
- please contact the Service
Centre to ask for the software
update by SD card
- wrong SKEW adjustment - adjust the SKEW by following
the instructions on page 67
11. Disturbed images - failure of the receiver - refer to the user manual of the
receiver for support, spare
parts and warranty conditions.