Page 12
9. Using the food chute handle, pull the food chute all the way towards you. Turn the slice thickness dial
clockwise past zero (0) until it stops to close the slicer table. Now you can load and unload food product from
the food chute.
10. When finished using the slicer, make sure the slicer is turned off, the slice thickness dial is turned clockwise
past 0 until it stops,and the auto engage lever is in the “Manual” position.
MANUAL USE OF AUTOMATIC SLICER
ALWAYS make sure the auto engage lever is in the “Manual”
position before turning slicer on (Fig. 12-1).
1. Automatic slicers can be used manually when desired.
2. When manually operating an automatic slicer the auto engage lever
MUST
be in the
“Manual”
position before turning the slicer on. The
lever should not be moved out of the “Manual” position at any time
during use.
3. Follow the instructions on page 11 and 12, skipping steps 6 and 7,
which have to do with activating the auto engage lever for automatic
slicer operation.
Operating Instructions
AUTOMATIC SPEED SETTINGS
Model #
Chute Speed Setting Strokes Per Minute
3850P
L
40
H
60
3975P
1
20
2
28
3
32
4
38
5
40
6
50
7
52
8
58
9
60
Note: Strokes per minute may vary +/- 10%.
Figure 12-1
Auto Engage Lever
Содержание 3600P
Страница 2: ......
