Page 11
AUTOMATIC SLICER OPERATION
1. Make sure the slicer is turned off (power indicator light not illuminated). Make sure the auto engage lever is in
“Manual” position and the food chute moves freely.
2. Pull the food chute completely towards you and place the food product onto the food chute. Slice only
boneless, unfrozen product with the slicer. Swing the endweight into position to secure food product.
3. If the food product is too long, place the endweight on top of the food product and use the endweight prongs
to hold the food product in place.
4. Rotate the slice thickness dial counterclockwise to the desired setting. If you happen to go past the desired
setting you must first rotate the slice thickness dial clockwise past zero (0) and then rotate the dial back to the
desired slice thickness setting. After slicing is complete, always turn the slice thickness dial clockwise past
zero (0) until it stops to close the slicer table.
5. Press the start button. The power indicator light will illuminate. If the speed light is flashing, then the auto
engage lever is in the “Automatic” position. Press the stop button to turn off the machine. Lower the auto
engage lever to the “Manual” position and restart the unit.
BE ALERT. The next step will cause the food chute to move automatically and it can move either
direction on start up.
NEVER attempt to adjust, load or unload food chute when slicer is in automatic operation.
NEVER put hand into the chute arm opening on the right side of the slicer.
6. To make the food chute move automatically, pull up or raise the auto
engage lever into the “Automatic” position (Fig. 11-1).
a. Model 3850P – To adjust the chute speed press the faster button for 60
strokes per minute and the slower button for 40 strokes per minute.
b. Model 3975P – To adjust the chute speed press the slower or faster
buttons. The slicer defaults to speed 5 when the power cord is unplugged
and plugged back in. If the slicer is turned off but not unplugged, it will
return to the last speed used.
NOTE:
Chute speed can be adjusted prior to or after auto engagement.
7. To stop the automatic movement of the food chute, push down or lower the auto engage lever to the “Manual”
position.
The knife is still rotating even though the chute has stopped.
8. To turn the slicer completely off and stop the knife, press the stop button. If the auto engage lever has not
already been returned to the “Manual” position, push down or lower the lever to the “Manual” position.
Operating Instructions
Figure 11-1
Auto Engage Lever
Содержание 3600P
Страница 2: ......
