2
CAUTION
• This centrifuge must be located on a firm and level table.
• Make sure the centrifuge is horizontal before running.
• Do not move or relocate the centrifuge when it is running.
• If fluid spills in the rotor chamber, please promptly clean and dry with a dry cloth to avoid sample
contamination.
• Ensure removal of any objects and/or fragments of the tubes dropped inside the rotor chamber before running
the centrifuge.
Rotor Cautions:
• Always check for corrosion and damage on the rotor surface before using it. Do not use the rotor if an
abnormality is found.
• Do not set the speed beyond the allowable maximum speed of the rotor kits (rotor and adapters).
• Do not exceed the allowable imbalance.
• Use the rotor and tubes within their actual capacities.
• If any abnormal condition occurs during operation, please stop immediately and contact our service center.
Notify the service center of the warning code (if displayed) along with the model and serial numbers and a
detailed description of the issue.
• Vibrations are likely to damage the centrifuge. Please contact our service center if any abnormality is observed.
1. Specifications
Maximum Speed
4500rpm(300-4500rpm), increment: 100rpm
Maximum RCF
2490×g, increment: 100×g
Maximum Capacity
10ml×12, 15ml×8
Timer
30seconds - 99minutes-HOLD, continuous operation
Noise 56dB(A)
Driving Motor
Brushless DC motor
Safety Devices
Lid interlock, over-speed detector, automatic internal diagnosis
Power Requirements
Single-phase, 110V-240V, 50Hz/60Hz, 3A.
Ambient Condition
-Set-Up Site
Indoors only
-Altitude
Up to 2000 m above sea level
-Ambient Temperature
2°C ~ 40°C
-Humidity
80%
-Excess-Voltage Category
II
-Pollution Degree
2
Device Protection Class
I
EMC
EN/IEC 61326-1
FCC Class A
-Emitted Interference,
-
Interference Immunity
Class A
Dimensions (mm)
280 × 364 × 266 (L x W x H)
Weight 6kg
Additional features
Speed/RCF switch, pulse operation, processing display, audible reminder
Important Safety Information (Cont.)