GlobalTime NTP Products
21
Then, set the related options. If you need to set a fixed IP for the network card, then select
STATIC in the BOOTPROTO item. The operation is shown in Figure 1.3.1. Then assign the
appropriate IP, subnet mask and gateway. Finally click Submit to save the settings. If there
is no need for fixed IP, the network card will get IP through DHCP. Then you only choose
DHCP under the BOOTPROTO item. The relevant information about the current card will be
set out as below.
3.6.3
NTP settings
Click "NTP Settings" in the navigation bar to enter the NTP setting item, as below:
NTP settings
The items BROADCAST, TRUSTED KEY, PEER represent the broadcast IP address, MD5
checksum and PEER respectively.
When the BROADCAST and PEER are not put to use, it will display "disable". If you need to
configure the settings, then enter the exact IP address and click Submit.
TRUSTED KEY is the MD5 checksum and is used for checking the NTP service. Generally
you only need to select the key items in the drop-down menu. If you need to add items by
yourself, please click edit.