GlobalTime NTP Products
16
press Q return !
3.3.8
System function
1). ping
input target
IP(Q return):
input the target IP address and then press
“
Enter
”
, by pressing
“
Ctrl +c
”
to return to the
previous sub-menu while
“
Q
”
to return to the previous menu.
2). Time
Mon jul 30 19:16:31 CST 2007
Display the current system time, by pressing
“
Enter
”
to return to the previous menu
Reset configuration
press Q return !
3.3.9
Change the password
If type "3" in the main configuration interface, it will enter into the "change password"
interface, shown as figure 3-5. At first, you need to type the original password. If correct, it
will prompt to a new password. The user password contains 5-8 characters. Note: the
password can not be too simple. If take some meaningful words as the password, it will
probably be refused by the system.
Figure 3-5
Change the password
3.3.10
Exit
type "4" in the main configuration interface, it will return to the user-login screen.
3.4
Time server logon through the network
For the sake of the system security, the time server supports login by SSH. The login
configuration is as the following interface. The interface after connecting is the same as the
HyperTerminal login.
