Global BEAT-Tr Скачать руководство пользователя

Страница: 38 / 51

USER MANUAL

Range BEAT-Tr

Edition: January 2016

- MODE OF USE

Revision: No. 3

TEMPERATURE RANGE

-20/50ºC

The display shows the current ambient temperature

limits set.

Click the

and

keys to modify the values and the key

to move to the next field.

Click the START/VALIDATE key to accept the option. Click <STOP> to exit this option

without changing the temperature.

OPERATOR:

To modify the existing configuration of the option OPERATOR, proceed as follows:

WARNING !
This option might have restricted access. If enabled, the following screen

will appear initially:

OPERATOR:

Enter the supervisor PIN number.

Once the supervisor code has been introduced and the START/VALIDATE button pressed,

the following screen that is directly shown that not having the restriction enabled:

>SHOW

COMPULSORY

Pressing START/VALIDATE key the current configura-

tion is showed.

SHOW

<YES>/<NO>

<YES> corresponds to operator’s identification enabled

whereas <NO> to disenabled.

Use the

keys to shift from <YES> to <NO> or vice versa. Click the START /

VALIDATE key to accept the selection made. Click <STOP> to exit this option without

making a modification.

The next option allows to establishing the obligation or not in carrying out the identifica-

tion.

SHOW

>COMPULSORY

Pressing START/VALIDATE key the current configura-

tion is showed.

COMPULSORY

<YES>/<NO>

<YES> enables the obligation and automatically makes

that the SHOW option shifts to <YES>.

Use the

keys to shift from <YES> to <NO> or vice versa. Click the START /

VALIDATE key to accept the selection made. Click <STOP> to exit this option without

making a modification.

The next option allows to establishing the operator’s identification following ISO 12176-3

criteria in the fields of expiration date and skills (that the operator’s would be allowed to

carry out electrofusion joints).

NOTE !
The fact to enable this option (by selecting <YES>), automatically

disenable the data manual input.

Содержание BEAT-Tr




















































Результаты поиска

Содержание BEAT-Tr

Отзывы:

Похожие инструкции для BEAT-Tr

Бренды по названию

Популярные бренды

Global BEAT-Tr, Руководство пользователя

Результаты поиска

Содержание BEAT-Tr

Отзывы:

Похожие инструкции для BEAT-Tr

Бренды по названию

Популярные бренды