Global BEAT-Tr страница 37 Скачать руководство пользователя

Страница: 37 / 51

USER MANUAL

Range BEAT-Tr

Edition: January 2016
Revision: No. 3

MODE OF USE -

3.2.4 SETUP option:

Validate the option of the SETUP menu:

INFO

>SETUP

Use the

and

keys to move to the selected option

and validate with the START key.

This enables access to the following options: LANGUAGE / DATE/TIME / TEMPERATURE

RANGE / OPERATOR / JOB / AUXILIARY DATA / TRACEABILITY / SCRAPER BARCODE /

CLAMP BARCODE.

Use the

and

keys to move to the selected option and validate with the START key.

LANGUAGE:

LANGUAGE

The display shows the letters of the active language.

Click the

and

keys to see the other languages loaded in the unit. If you cannot find

the language you want, consult with your distributor.

Click the START/VALIDATE key to accept the option. Click <STOP> to exit this option

without changing the language.

DATE/TIME:

The following option enables you to update the unit’s date and time.

WARNING !
This option might have restricted access. If enabled, the following screen

will appear initially:

OPERATOR:

Enter the supervisor PIN number.

Once the supervisor code has been introduced and the START/VALIDATE button pressed,

the following screen that is directly shown that not having the restriction enabled:

dd/mm/yy

hh:mm

dd/mm/yy corresponds to the date and hh:mm to the

time.

Click the

and

keys to move the field and

and

keys to modify values. Once past

the second line, it is not possible to return to the first. You will have to click <STOP> to

restart the change of date/time. Click the START/VALIDATE key to accept the option once

you have gone over the 5 fields. Click <STOP> to exit this option without making a

modification.

TEMPERATURE RANGE:

This option allows us to select the ambient temperature range wished according to the

applicable company specification. The temperature limits of the unit are -20ºC and +50ºC

(-4ºF and +122ºF).

Содержание BEAT-Tr




















































Результаты поиска

Содержание BEAT-Tr

Отзывы:

Похожие инструкции для BEAT-Tr

Бренды по названию

Популярные бренды

Global BEAT-Tr, Руководство пользователя

Результаты поиска

Содержание BEAT-Tr

Отзывы:

Похожие инструкции для BEAT-Tr

Бренды по названию

Популярные бренды