Global Solar powerflex, Руководство по установке

Страница: 23 / 25

DOCUMENT NO. 1000564 REV. E
21
Switches:
GEL / LEAD ACID : Select the b att ery type used.
Current / Voltage: Sets the LCD display to indicate charging current (A) or ba tt ery voltage (V) in the
charging mode.
Charge Controller Specifications:
Max Solar Panel Array Power 400W
Input Voltage 16.5V – 22V
Max Input Voltage 25V
Max Charging Current 30A
Continuous Current Rating 20A
Constant Voltage – GEL Battery 14.2V
Constant Voltage – Lead Acid
Battery 14.6V
Float Voltage 13.5V
Temperature Protection OK (by electronic circuit)
Battery Reverse Protection OK (by electronic circuit)
Output Short Protection OK (by electronic circuit)
Operating Temperature 0
°
C ~ 40
°
C
Storage Temperature -10
°
C ~ 70
°
C
Dimension (mm) 181(L) x 104(H) x 31(D)
Weight 275g
CAUTION:
This charge controller is for 12V systems only. Do not use with other voltage systems.
Do not exceed the maximum input rati ngs.
Do not reverse the BATTERY and ARRAY connec ti ons to the controller.
If your PowerFLEX
TM
MOBILE system will be stored in shaded cond iti ons for longer than one week,
it is recommended that the BATTERY be disconnected from both the load and also the ARRAY.
Solar Panel Specifications :
Nominal Power (Pmax) 100W
Voltage (Vmp) 17.8V
Nominal Current (Imp) 5.6A
Open Circuit Voltage (Voc) 23.3V
Short Circuit Current (Isc) 6.4A
Power Tolerance ±7%
Speci fic a ti ons are for one (1) solar panel at STC (Standard Test Condi ti ons) of 1000W/m
2
, 25°C, AM1.5