User's Manual
Wall Mounted Water Bottle
Refilling Station
Resetting Filter Status
1. Press and hold ENTER button for 5 seconds, until
Reset Ft is displayed on the LCD screen.
2. Tap SET button to access Reset Ft mode.
3. Press and hold SET button for 5 seconds to reset filter
status. The LCD screen will display 0000 and the LCD
filter status bar will reset to the full 5 bars.
Select Filter Size
1. Press and hold ENTER button for 5 seconds until
Reset Ft is displayed on the LCD screen. Tap
ENTER
button untill Ft Size is displayed on the LCD screen.
2. Tap SET button to access Filter Size mode.
3. Tap SET to toggle between 1500, 3000, and 3600
gallon filter size options, or No Ft to bypass filter size
if a filter is not being used. Note: For filter capacities
higher than 3600 gallons, select 3600.
4. Tap ENTER button to confirm your filter size.
Resetting Bottle Counter:
1. Press and hold ENTER button for 5 seconds.
2. Tap ENTER button until Reset Ct is displayed on the
LCD screen, then tap SET button to access Reset Ct
mode.
3. Press and hold SET button for 5 seconds to reset
bottle counter number to zero 00000000.
4. Tap ENTER button 1 time to return to standard bottle
counter view.
Note:
• After press and hold button for 5 seconds, tap Enter to
toggle between Sens Set, Filter Size and Reset Ct available
too.
• If a selection is not made within 10 seconds, system will
automatically return to the standard bottle counteriew.
• Changes on Sens Set mode not allowed
11
Programming Settings
Accessing the Programming Buttons:
To access the programming buttons, open the filter
access door on the lower cover using the provided key
(H6). The two program buttons are located on the top of
the filter access door frame.
Programming
Buttons:
Set
Enter
b82045fc-0b136962-90871f19-f891407c
