STATUS
QUEUE REVIEW
ZONES
FAULTS
KEYPAD
CONTROLS
DISABLEMENTS
FIRE
FAULT
PRE-ALARM
TEST
DISABLED
SYSTEM ON
ALARM FAULT
SUPPLY FAULT
SYSTEM FAULT
ENTER
ESC
DELAYS
ACTIVE
SELECTED
DETECTORS
SOUNDERS
DISABLE
AUXILIARY
RELAYS
SOUNDERS
ACTIVATE/ SILENCE
SYSTEM RESET
LAMP TEST
BUZZER
SILENCE
DISABLED
TEST
FAULT
FIRE
1
2
3
4
5
6
7
8
MANUFACTURED IN THE E.U. TO THE
REQUIREMENTS OF EN54 Pt 2 & Pt 4 1999
If any detector detects a pre-alarm condition, the STATUS
- PRE-ALARM
will light up AMBER.
LED
FOLLOW SITE SPECIFIC INSTRUCTIONS
1.12 IF THE PANEL DISPLAYS A PRE-ALARM
If the system detects a fault, the STATUS - FAULT
will light up AMBER.
LED
CALL THE MAINTENANCE ENGINEER
OPERATION
1.11 IF THE PANEL DISPLAYS A FAULT
G L O B A L
F I R E
E Q U I P M E N T
JUNiOr
14
JUNIOR V3 - OPERATION & MAINTENANCE MANUAL - REVISION 2.3 - 17-SEP-2005
1.10.4 ENABLE / DISABLE ZONES
In order to Enable/Disable a zone follow the procedure described below:
1 - Enter either a valid User or Programming Code.
2 - Select Function 3.1 (Zones Disable/Assign), using the
arrow keys. Press ENTER when menu 3 is
reached.
3 - Using the
arrow keys once more, select function 3.1 and press
.
4 - Select the zone to be disabled using the
arrow keys and press
.
5 - The present status of the zone is shown. To change it, press
and change the status using the
arrow keys from enabled to disabled and vice versa. When selection is complete press OK/Enter.
To exit press the ESC key. Each consecutive press of the ESC key will revert back one step.
If any zones are disabled during this time, the DISABLED LED in the STATUS area of the panel's fascia will
be lit. The DISABLED LED in the QUEUE REVIEW area will also be lit. If the latter LED flashes, this gives the
indication that more than one disblement has taken place in the system. To scroll through these multiple
disablements, press the DISABLED button in the QUEUE REVIEW area.
pq
pq
pq
pq
ENTER
ENTER
ENTER
